2025 Cub Cadet® Commercial Zero-Turn Mowers PRO Z 772L

Information

2025 Cub Cadet® Commercial Zero-Turn Mowers PRO Z 772L

The Cub Cadet® PRO Z 772 L 72-in. 31 HP* Commercial Zero-Turn Lawn Mower features a triple 7-gauge fabricated steel cutting deck with top, bottom and side reinforcements. Equipped with maintenance-free spindles and pulleys to deliver peak performance with limited downtime. Hydro-gear transmissions engineered for quick ground speeds and smooth handling.

Features may include:

  • 31 HP Kawasaki FX921v (999cc) engine and 12cc Hydro-Gear 4400 transmission
  • 72” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
  • 3-Year / no hour limit warranty and/or 5-Year 1,200 hour warranty

Photos

Highlights

  • Gallatin, Missouri
  • 2025
  • Cub Cadet®
  • Commercial Zero-Turn Mowers PRO Z 772L
  • Model: FX Series | Model Number: 921V
  • ROPS: 2" x 2" spring-latch tool-less foldable 3 position | Bumper: 5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch | Yokes: 1/2" thick steel front yokes
  • 12cc Hydro-Gear 4400
  • Available
  • Cutting Height Range: 1” to 5” in 1/4” increments

Specifications

  • 2025
  • Cub Cadet®
  • Commercial Zero-Turn Mowers
  • PRO Z 772L
  • Zero-Turn Mower
  • Model: FX Series | Model Number: 921V
  • Kawasaki®
  • 999cc
  • Output: 31HP
  • Ignition Key
  • Twin
  • Fully pressurized
  • High Density
  • Fuel Delivery: Carburetor
  • Deck Engagement (PTO): electronic fingertip engagement pto
  • Separate Choke
  • 12cc Hydro-Gear 4400
  • Control: High Performance & Speed Control
  • Seat: High-back dial suspension with EVC cushion, ISO mounted base (lateral suspension)
  • Hand-operated lever with integrated hydro pump release lever
  • 24"x12"-12"
  • 13"x6.5"-6"Reliance Carlisle run-flat
  • Turf Tread
  • Turf Tread
  • 15 amp regulated
  • Forward: 12 mph / 19 km/h | Reverse: 6 mph / 9.5 km/h
  • ROPS: 2" x 2" spring-latch tool-less foldable 3 position | Bumper: 5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch | Yokes: 1/2" thick steel front yokes
  • Fully welded, full-length 3/8 x 5" laser cut steel / integrated tie-down slots
  • Front Axle: 2" x 3" solid axle tube with ISO dampening suspension
  • Deck: 72 in
  • Cutting Height Range: 1” to 5” in 1/4” increments
  • Dual 7.45 gal. US (28.2 L)
  • 2.0 qt. US (1.89 L)
  • Blade(s): 3 high-lift Marbain® blades / 18,500 fpm (approx.) | Anti-Scalping: 4 front deck gauge wheels | Deck Positions: Foot pedal with spring assist, 16 Positions | Armrests: Padded arm rests | Seat Adjustment: Angle back adjust and lumbar support | Hour Meter: Crew Boss | Cup Holder: Intergrated into Side Pod
  • Material: fabricated 7ga. (.187”) steel shell | Construction: 7ga. top plate 7ga. bottom reinforcement ¼” rolled leading edge
  • Spindle Construction: 8" sealed cast aluminum housing (maintenance-free)
  • High-back cushion with seat belts
  • Chute: High-density, impact-resistant rubber
  • Commercial: 3-Year / No Hour Limit Warranty and/or 5-Year 1,200 Hour