Gallatin Truck and Tractor

  • 24000 MO-6
  • Gallatin, MO 64640
  • Call Us: (660) 663-2103
  • http://www.gallatintt.com/
Print This Page

2025 Vermeer® Disc Mowers CM295

Information

2025 Vermeer® Disc Mowers CM295

A breakaway system helps protect the cutter bar by getting it out of the way in the event of a collision with an obstacle. After colliding with an obstacle, the cutter bar returns to the operating position without the operator having to leave the cab.

Hydraulic suspension on each side of the combination mower ensures excellent adaptation to the ground and a precise cut and clean forage in a variety of terrains and in all conditions.

Achieve efficiency and a premium cut with a robust cutter bar made with 4-mm (0.16-in) specially shaped pods that allow rapid forage flow, even when on slopes.

Blades are simple and quick to replace to help minimize downtime for replacement – plus, reversible blades offer extended usability.

Navigate headlands efficiently with a sequential lifting system that uses hydraulic stabilization to lift the insides of the cutter bar first.

Each pod is made from abrasion-resistant Hardox® steel to provide you with long-lasting performance acre after acre.

A robust, yet simple frame is strong enough to support the mower when folded, yet gives plenty of accessibility for easy hook-up so you’re ready to tackle the field with ease.

Protect damage to the internal components of your cutter bar with shear protection.

Abrasion-resistant Hardox wear skids feature a large surface area to help protect the cutter bar and lengthen service life.

Choose the best option for your specific needs with options for a rubber roller conditioner, steel flail conditioner or a mower without a conditioner.

Features may include:

  • Exceptional efficiency and productivity Sign me up
  • Perfect for large operations who demand reliability, durability and versatile adaptation
  • Add the FM110 front mower to the mix and you have a triple mower with a working width of 29.8 ft (9.1 m)

Photos

Highlights

  • Gallatin, Missouri
  • 2025
  • Vermeer®
  • Disc Mowers CM295
  • Available
  • Roller Conditioner: 105 in | Flail conditioner: 105 in
  • Working: 60 in | Cut: 1.6 in - 2.8 in (4 cm - 7 cm)

Specifications

  • 2025
  • Vermeer®
  • Disc Mowers
  • CM295
  • Disc Mowers
  • Recommended: 200 hp (150 kW) when used with front mower | With rubber roller conditioner: 240 hp (180 kW) when used with front mower | With flail conditioner: 230 hp (170 kW) when used with front mower
  • Drive: 1000 rpm | recommended: 80 hp
  • Torque Protection: Friction and over-running clutch
  • Hydraulic
  • Low: 750 rpm | High: 1000 rpm
  • Disc: 3000 rpm | Roller: 1000 rpm
  • 2 double-acting, 1 single-acting
  • 2030 psi
  • Rate: 6 gpm
  • Front 3-point, CAT II
  • Disc Diameter: 19.7 in | Roller Diameter: 8.9 in | Working Diameter: 19 in
  • 157.5 in
  • 32 ft
  • 8.4 ft
  • 29.3 ft
  • Working: 7.2 ft
  • 10 ft | Ends up: 10.8 ft
  • Cutter bar clearance: 22 in
  • Working: 60 in | Cut: 1.6 in - 2.8 in (4 cm - 7 cm)
  • Roller Conditioner: 105 in | Flail conditioner: 105 in
  • Roller conditioner: minimum: 44 in | Roller conditioner maximum: 91 in | Flail conditioner: minimum 75 in | Flail conditioner: 106 in
  • Total: 5160 lbs | With rubber roller conditioner: 6810 lbs | With flail conditioner: 6658 lbs
  • Number of Discs: 8 | Number of Blades: 32 | Quick Clip® blade retention system: Quick blade change | Quick-Change™ shear ring: 4 brass pins shear protection | Type: Intermeshing rubber rollers (Roller conditioner), Steel V-tine (Flail conditioner)| Conditioner Drive: (3) V-belt (Roller conditioner), Cogged belt (Flail conditioner)
  • Gear bed cutter bar
  • Angle: Top-link on 3-point